Can You Extend Your Existing Driveway with Pavers? (Jacksonville Guide)
Your driveway is too narrow. Or too short. Or it ends where you wish it didn’t. Maybe you added a third car to the household. Maybe you want guest parking that doesn’t block the garage. Maybe you’re tired of driving onto the grass every time someone parks in the driveway.
The good news: yes, you can absolutely extend an existing driveway with pavers — and in many cases, it’s a faster and more affordable project than homeowners expect. Here’s how driveway extensions work in Jacksonville.
The 4 Most Popular Driveway Extension Types
1. Side Widening
Adding width to one or both sides of your existing driveway. This is the most common extension — it creates room for two cars to park side by side, or for a car to park while another pulls in and out of the garage without juggling vehicles. A typical side widening adds 4–8 feet of width along the existing driveway length.
2. Length Extension
Extending the driveway deeper toward the property or further toward the street. Common when the original driveway is too short to fit vehicles without overhanging the sidewalk or extending into the road.
3. Turnaround / Hammerhead
Adding a turnaround area at the end of the driveway so vehicles can turn around and exit forward instead of backing out into the street. This is a safety upgrade that’s especially valuable on busy streets, in neighborhoods with children, or for properties with limited sight lines at the road.
4. Parking Pad
A separate paver pad adjacent to the driveway — typically 10×20 feet — sized for one additional vehicle. Parking pads are the simplest extension to build because they don’t require connecting to or modifying the existing driveway surface.
Matching New Pavers to an Existing Driveway
The biggest concern homeowners have about extensions is matching. If you have an existing paver driveway and you’re extending with more pavers, matching the color and style is usually straightforward — especially if the original pavers were a common product from Tremron, Belgard, or another major manufacturer. We identify the existing paver product, source a matching or closely complementary material, and install the extension with the same pattern and joint width.
If you have a concrete or asphalt driveway and want to extend it with pavers, there are two approaches. You can extend with pavers only in the new area, creating a deliberate contrast between the original surface and the paver addition. Or you can overlay the existing surface with pavers (if it’s structurally sound) to create a unified look across the entire driveway. The overlay approach costs more but gives you a completely new driveway appearance.
A contrast border between the old driveway and the new paver extension can actually look intentional and stylish — like the extension was always part of the plan. A soldier-course row of contrasting pavers at the transition makes the design look cohesive rather than patchwork.
What Driveway Extensions Cost in Jacksonville
| Extension Type | Typical Size | Cost Range |
|---|---|---|
| Side widening (one side) | 100–200 sq ft | $1,200–$4,000 |
| Length extension | 100–300 sq ft | $1,200–$6,000 |
| Turnaround pad | 150–250 sq ft | $1,800–$5,000 |
| Parking pad (1 car) | 200 sq ft | $2,400–$5,000 |
Extension pricing follows the same per-square-foot rates as full driveway installations ($10–$25/sq ft depending on material), but the total cost is lower because you’re adding area rather than replacing the entire surface.
Do You Need a Permit for a Driveway Extension?
In most cases in Duval County, a driveway extension that doesn’t change the curb cut or encroach on the public right-of-way doesn’t require a building permit. However, extensions that modify the curb opening, extend into the front setback, or exceed lot coverage limits may need city approval. We check local requirements for every project before starting work.
If you’re in an HOA community, driveway extensions typically need architectural review board approval. We handle this paperwork as part of our project planning.
Get a Free Extension Estimate
Not sure how much area you need to add, or what material will match best? We’ll come out, measure your existing driveway, identify your current paver product (if applicable), and give you a detailed estimate for the extension. Call (904) 867-4076 or request your free estimate online.
Frequently Asked Questions
Can I add pavers to a concrete driveway?
Yes — either as an extension alongside the existing concrete, or as an overlay on top of it (if the concrete is structurally sound and at the right elevation). Both approaches work well and give you the upgraded look of pavers without full demolition.
Will new pavers match my old ones?
If your existing pavers are from a major manufacturer (Tremron, Belgard, etc.), we can usually source matching or very similar products. Even if an exact match isn’t available, a contrast border between the old and new sections creates a cohesive, intentional look.
How long does a driveway extension take?
Most residential driveway extensions are completed in 1–3 days depending on size and complexity. It’s one of the quickest outdoor improvement projects with the highest visual and functional impact.
Is it cheaper to extend a driveway or replace the whole thing?
Extending is always cheaper because you’re adding 100–300 square feet instead of replacing 400–800 square feet. If your existing driveway is in good condition, an extension gives you the extra space you need at a fraction of full replacement cost.
